Here are ten general steps for measuring temperature:

1. Identify the location where the temperature needs to be measured.
2. Select a thermometer that is appropriate for the temperature range being measured and the accuracy required.
3. Check the thermometer to ensure it is calibrated and working properly.
4. Prepare the thermometer by wiping it clean and dry, if necessary.
5. Turn on the thermometer, if it is digital, or shake it down to below the lowest reading, if it is a mercury thermometer.
6. Insert the thermometer into the medium whose temperature you want to measure, such as a liquid, gas, or solid.
7. Wait for the thermometer to stabilize and reach an accurate reading. This may take a few seconds or several minutes, depending on the type of thermometer and the medium being measured.
8. Read and record the temperature on the thermometer. Be sure to record the units of measurement (e.g. Celsius or Fahrenheit).
9. Remove the thermometer from the medium and turn it off, if necessary.
10. Clean the thermometer and store it properly for future use.

It is important to follow these steps carefully to ensure accurate temperature measurements. Additionally, specific applications may require additional steps or considerations.