StopLearnStopLearnWe shall discuss the following:
1 (a). Operation of Pressing Iron (Electrical)
The basic principle of the appliance is that a heating element is built into it. The heating element is made of a material with high resistance and high melting point.
As current flows through the circuit, the immense electrical energy used to overcome the resistance is turned into heat energy and the heat thus produced is used in ironing. The high melting property of the element enables it to withstand the great heat. The electric iron is made up of the following parts.
(a) A nichrome element wound on mica former
(b) Two heavy stainless steel plates in between which the element is fixed. The weight of the steel plates applying pressure which, coupled with the heat from the element, smoothens the clothes being ironed.
(c) An asbestos pad, a poor conductor of heat, which is fitted to the upper steel plate to minimize the upward flow of heat from the element.
(d) Mica plates which insulate the steel plates from electricity but conducts the heat from the elements to the steel plate for ironing.
(e) A bimetallic thermostat which controls the extent to which the plates are heated.
The temperature produced by such irons varies between 1210C and 2040C. The lower temperature range is used for ironing synthetic materials like nylon, terrylene and so on, while the higher range of temperature is used for pressing cotton materials.
(b) Operation of an electric Kettle
This is made up of the following:
(a) A chrome-plated aluminium or copper body.
(b) A nichrome element encased in a metal tube and insulated with a refractory material such as magnesia. The tube must be watertight to avoid water leaking into the element. When the element is heated, the magnesia insulation conducts the heat to the metal tube which is in contact with the water to be heated.
(c) Operation of an electric cooker
A modern electric cooker has several cooking points so that several items can be cooked at the same time. Each cooking point consists of a steel plate in which two nichrome elements spiral shape are fixed. The spiral shape of the elements makes it possible for a greater length of the element to be contained in a small space. We should remember that the longer the elements, the greater its resistance and also the greater the heat produced.
The elements are encased in magnesia to insulate them from the steel plate. When the electric circuit is switched on, the element heats the metal disc to cooking temperature.
(d) Water heater (Free outlet)
There are various types of electric water heater such as (1) Free outlet (Pressure type and (3) Cistern types. They operate on the basic principle of electric energy converted into heat and by conduction, cold water is heated. The main differences are (a) The free outlet type supplies limited hot water by the inrush of cold water to displace the heated quantity at turning the only tap. Use in the bathrooms with single tub.
The pressure type has an advantage of its ability to supply many hot water outlet points since many taps can be fitted on its outlet pipe but will always depend on the supply mains pressure. If a free outlet water is filled with a cistern, smaller quantity of hot water can be ready for use always as in the cistern type water heater. An example of this is the cylindrical tank found in bathrooms. Like the electric kettle, the ceramic or metal tank contains nichrome elements insulated with magnesia and enclosed with a metal tube. Water heater by the immersion of the element, rises up in the tank thereby forcing the topmost hot water to flow freely outward.
Conversion of Chemical Energy to Heat Energy
The commonest method of obtaining heat for cooking and other purposes in our homes is by burning fuel such as firewood, charcoal, kerosene and gas. Burning is a combustion process in which chemical energy is converted to heat energy. During the combustion process, heat is released. Solid fuel such as wood and charcoal are complex compound of carbon, nitrogen, metal and sulphur, while gaseous fuel of various types are compounds of hydrogen and carbon.
Gaseous fuel is usually referred to as hydrocarbon. Examples of hydrocarbon are butane (cooking gas) and kerosene. In the process of burning, oxygen from the air combines with hydrocarbons to form carbon(iv)oxide and water in form of steam, and heat is released. Many appliances have been designed to convert chemical energy to heat energy for domestic and industrial uses. Some of them are described below:
(e) Gas Lamp
A gas lamp consists of a gas cylinder, a pipe and cylindrical or spherical glass. The natural gas (butane) is compressed into the cylinder. A metal pipe is fixed at the top of the cylinder. At the upper end of the metal pipe, the mantle is fixed. A regulator is fixed on the pipe to control the amount of gas that comes out fir burning. To use the gas lamp, the regulator is opened and the gas that appears at the top of the pipe is ignited. The gas burns at a very high temperature and the flame that results from the burning heat mantle.
(f) Gas Cooker
The principle of operating a gas cooker is similar to those of the gas lamp except that the cooking unit is not fixed on top of the cylinder; rather it is connected to the cylinder by a rubber tube. Also, the metal pipe through which the gas flows to the burning points are built into the cooker. A metal disc is placed at the burning point to guide abs spread the flame. The very hot flame resulting from the burning of the gas flows out and provides the heat used in the cooking.
(g) Kerosene
Kerosene is a liquefied gas. Its chemical action during burning is similar to that of cooking gas. The kerosene cooker consists of the stand, a gas container, perforated cylinders are usually three in number and the assembled concentrically. The innermost and the middle ones are perforated to allow in air during burning while the outermost one is not. To cook with the cooker, the metal pipe is opened, kerosene flows from the container through the wick, which provides easy passage for the kerosene to travel to the top of the wick and evaporate. When ignited, the vaporized kerosene burns and provides the heat required for cooking.
(h) Charcoal Pressing Iron
Charcoal is an incompletely burnt wood, which is very high in carbon content. The pressing iron is a heavy steel container whose bottom plate is in the form of an isosceles triangle. The cover plate, which has the same shape as the bottom plate, is hinged to the main container at the base of the sides to let in air.
When the container is loaded which charcoal and ignited, it burns to release heat energy. The heat energy heats up the steel container, which is then used for pressing clothes.
Read our disclaimer.
AD: Take Free online baptism course: Preachi.com 